How to Use the Binex Now COVID-19 Antigen Self-Test
Introduction:
- The Binex Now COVID-19 antigen self-test is a quick and convenient way to test for the presence of COVID-19 in the comfort of your own home.
- The test takes only 15 minutes to complete and does not require a prescription.
- It is available over-the-counter at retailers.
Before You Start:
- Carefully read the full instructions that come in the box.
- The box includes two tests, so you can repeat the testing process if desired.
- It is recommended to test yourself twice over three days with at least 24 hours between tests.
- Testing more frequently may help you detect COVID-19 more quickly and reduce the spread of infection to others.
- Gather the following items: two test cards, two dropper bottles, two swabs, and an instruction sheet.
- You will also need a timer (not included) and gloves (also not included).
- Wash or sanitize your hands and make sure they are dry before beginning.
Preparing for the Test:
- Lay the test card flat on a table for the entire test.
- Make sure the testing kit and its components are kept out of the reach of children and pets.
- Check that there is a blue line showing in the result window. If there is not, do not use the test card and contact technical support.
Collecting a Nasal Sample:
- Open the swab package and remove the swab, being careful to keep your fingers away from the swab end.
- Swab both nostrils carefully, inserting the soft tip of the swab into one nostril and using medium pressure to rub the walls of the nostril for about 15 seconds.
- Repeat the process in the other nostril.
Performing the Test:
- Insert the swab tip into the bottom hole of the test card and push it firmly until it is visible in the top hole.
- Do not remove the swab from the card.
- Turn the swab to the right (clockwise) three times to mix the swab with the drops.
- Leave the swab in the card for the remainder of the test.
- Peel the adhesive tape liner off the right edge of the card and close the left side of the card over the swab.
- Press firmly on the two lines on the right edge of the card to seal it.
- Leave the card face up on the table.
- Wait 15 minutes, making sure not to move or touch the card during this time.
Reading the Results:
- After 15 minutes, check the result window for the presence of two pink or purple lines.
- Make sure to look closely at the bottom half of the results window, where it says “sample.” Even a faint line next to “sample” is a positive result.
- If there is only one pink or purple line on the top half of the results window (where it says “control”), the result is negative and COVID-19 was not detected.
- If the result is invalid (neither a positive nor negative result), the test was unable to determine whether you have COVID-19 or not. A new test will be needed to get a valid result.
Next Steps:
- If the result is negative, take a second test within 24 to 48 hours.
- If the result is positive, contact your healthcare provider and follow their instructions.
- Share your test result with your healthcare provider.
- Dispose of all used
FAQs:
How accurate is the Binex Now self-test?
The accuracy of the test can vary depending on various factors, such as the quality of the sample collected and the timing of the test relative to when symptoms appeared or when the individual was exposed to the virus. It is important to follow the instructions carefully and to repeat the test if necessary to get the most accurate result.
What should I do if I get a positive result?
If you get a positive result on the Binex Now self-test, it is important to contact your healthcare provider and follow their instructions. They may recommend additional testing or advise you on how to manage your symptoms and prevent the spread of infection to others.
Can I use the Binex Now self-test if I am asymptomatic (not showing any symptoms)?
Yes, the Binex Now self-test can be used to test for COVID-19 even if you are not showing any symptoms. It is important to follow the instructions carefully and to repeat the test if necessary to get the most accurate result.
Can the Binex Now self-test be used to test children?
The Binex Now self-test is not recommended for use in children under the age of 2. For children over the age of 2, it is important to follow the instructions carefully and to have an adult assist with the test if necessary.
What should I do if I get an invalid result?
If you get an invalid result on the Binex Now self-test, it means that the test was unable to determine whether you have COVID-19 or not. It is important to contact technical support at 833-637-1594 for assistance and to consider taking a new test to get a valid result.
